elero AstroTec-868 bidi Bedienungsanleitung Seite 84

Programming
Warnhinweise
SETTING
HOLIDAY, LIGHT SENSOR (Holiday OFF/ON, sun/twilight setting)
OK
SETTING HOLIDAY
+/–
HOLIDAY ON
1. Press the MENU button.
2. To select the SETTING menu, press the
+ button until SETTING appears.
3. Confirm by pressing OK. HOLIDAY ON/OFF will appear.
4. You can set the holiday function to ON or OFF by pressing the
+/- button.
5. Confirm your selection by pressing OK.
N.B.: This dialog window will only be displayed if a light sensor is
connected to the device.
You have confirmed the holiday function. SUN will appear.
The value set is displayed.
6. You can reset the sunlight setting by pressing the +/- button.
(The two digits on the left of the display show the current light
value)
7. Confirm your entry by pressing OK.
To set the TWILIGHT SETTING, follow the same procedure as for
SUN.
The SUN/TWILIGHT function has now been set.
Please read on for further programming options using the
SETTING menu.
EN-32
LIGHT
OK
SENSOR OK
see
CONNECTED ?
next page
SUN
+/–
OK
TWILIGHT
+/–