janitza 800-DI14 Installationsanleitung Seite 6

800-DI14 module
Digital input module
for the UMG 801
Installation manual
Janitza electronics GmbH
Vor dem Polstück 6
35633 Lahnau/Germany
Support tel. +49 6441 9642-22
Email: info@janitza.de
www.janitza.de
Relevant laws,
standards and directive used
Please see the declaration of conformity on our
website (www.janitza.de) for the laws, standards
and directives applied for the device by Janitza
electronics GmbH.
INFORMATION
Our usage information uses the grammatical mascu-
line form in a gender-neutral sense! This form always
refers equally to women, men and diverse. In order
to make the texts more readable, distinctions are
not made. We ask for your understanding for these
simplifications.
General
1
Disclaimer
Compliance with the usage information for the
devices, modules and components is a prereq-
uisite for safe operation and attaining the stated
performance characteristics and product features.
Janitza electronics GmbH assumes no liability for
bodily injury, material damage or financial losses
which result from disregard of the usage infor-
mation. Make sure that your usage information is
readily available and legible.
Further usage information, such as the installation
manual or the user manual for the basic device,
can be found on our website, www.janitza.de
under Support > Downloads.
User Manual:
Copyright notice
© 2022 - Janitza electronics GmbH - Lahnau.
All rights reserved. Any reproduction, processing,
distribution or other use, in whole or in part, is
prohibited.
Safety
2 2
Safety information
The installation manual does not represent a
complete set of all safety measures required for
the operation of the device (module/component).
Special operating conditions can require addi-
tional measures. The installation manual contains
information which must be observed to ensure
your personal safety and avoid material damage.
Symbols used on the device (module/compo-
nent):
6 / 10
Subject to technical alterations.
• Make sure that your device, module or compo-
nent matches the installation manual.
• First make sure you have read and understood
the usage information accompanying the prod-
uct.
• Keep the usage information associated with the
product available for the entire service life and
pass it on to any possible subsequent users.
• Please find out about device revisions and the
associated modifications of the usage infor-
mation associated with your product at www.
janitza.de.
Disposal
Please abide by national regulations! Dispose of
individual parts, as applicable, depending on their
composition and existing country-specific regula-
tions, e.g. as:
• Electronic waste
• Batteries and rechargeable batteries
• Plastics
• Metals
or engage a certified disposal
company to handle scrapping.
Safety information in the installation manual is
marked by a warning triangle and, in dependence
on the degree of hazard, is displayed as follows:
Warns of an imminent danger which results in
serious or fatal injury (death).
Warns of a potentially hazardous situation which
could result in serious injury or death.
The additional symbol on the de-
vice itself indicates an electrical
danger that can result in serious
Warns of a possibly hazardous situation which can
injuries or death.
result in minor or moderate injury.
This general warning symbol draws
attention to a possible risk of injury.
Be certain to observe all of the in-
Warns of an immediately hazardous situation
formation listed under this symbol
which, if not avoided, can result in material or
in order to avoid possible injury or
environmental damage.
even death.
INFORMATION
Indicates procedures in which there is no hazard of
personal injury or material damage.
DANGER
WARNING
CAUTION
ATTENTION