Akrapovic Evo Line Kit Montageanleitung Seite 6
Inhaltsverzeichnis
www.akrapovic.com
REMOVAL OF STOCK EXHAUST SYSTEM:
1.
Put the motorcycle on a central stand. Make sure, that surface is solid and flat.
2.
Unscrew marked bolts, unpin marked pins and carefully remove plastic cowlings on both side off the motorcycle
(Figure 1, 2, 3).
IMPORTANT: make sure not to scratch or damage any part of the motorcycle during this procedure!
IMPORTANT: make sure not to scratch or damage any part of the motorcycle or exhaust system during this
procedure!
Figure 1
Figure 2
6 / 24
Inhaltsverzeichnis
