Akrapovic Evo Line Kit Montageanleitung Seite 20

www.akrapovic.com
6. Assemble the Akrapovič carbon fiber heat shield onto the muffler, using Akrapovič bolts and heat resistant washers
(Figure 30, 31).
INSTALLATION TIP: screw the heat resistant washers onto the bolts; do not try to push them on!
IMPORTANT: make sure to place the bigger heat resistant washers between the muffler and carbon fiber
heat shield and smaller washers between bolts' heads and heat shield!
22Nm
16ftlb
Figure 29
Figure 30
20 / 24