Brightness Sensor - Hama Rhodos Bedienungsanleitung

5.7 Brightness sensor

• If you push the Auto-light button (7) to
ON, the backlight is automatically switched
on as soon as it goes dark. To switch off the
brightness sensor, push the switch to OFF.
6. Care and maintenance
• Only clean this product using a lint-free,
slightly damp cloth and do not use any harsh
cleaners.
• Ensure that no water is able to enter the
product.
7. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use
of the product or from failure to observe the
operating instructions and/or safety notes.
8. Technical data
Radio alarm clock
Power supply
Measuring range
Temperature
3.0 V
2 x AA batteries
-10°C – +50°C
14°F – 122°F
9. Declaration of conformity
Hama GmbH & Co KG hereby
declares that the radio equipment
type [00185894, 00185895]
is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following Internet
address:
https://support.hama.com/00185894
https://support.hama.com/00185895
Frequency band(s) 77.5 kHz
8