Alarm Clock; Summer Time; Temperature Display; Backlight - Hama Rhodos Bedienungsanleitung

• To select the individual values, press the Up
button (B) or the Down button (C) and con rm
your selection by pressing the SET button (A).
• The settings are ended automatically if no
entry is made for more than 20 seconds.
Note
Press and hold the Up (B) or Down (C) button
to select the values more quickly.
Note - day of the week
For the day of the week display, you can
choose the languages of German (GE), French
(FR), Italian (IT), Spanish (SP), Dutch (DU),
Danish (DA) or English (EN).

5.3 Alarm clock

Alarm clock settings
• Press and hold the Alarm button (D) for
around 2 seconds to go to Settings mode. Set
the following information in sequence: hour
(Alarm 1), minutes (Alarm 1), hour, (Alarm
2), minutes (Alarm 2). To select the individual
values, press the Up button (B) or the Down
button (C) and con rm your selection by
pressing the Alarm button (D).
Activating/deactivating the alarm clock
• Push the side Alarm ON/OFF slider button (8,
9) upwards. A green area appears underneath
the slider switch. The alarm clock is activated
and the display shows the alarm clock
symbol (1, 2).
7
• Once the alarm clock is activated, it is
triggered at the corresponding time and for
approx. 2 minutes an alarm signal is heard.
The frequency of the alarm signal increases
as the duration of the alarm increases (speed
alarm). After this, the alarm clock is stopped
automatically and triggered again at the set
alarm time the following day.
• To prematurely end the alarm clock, push
the ALARM ON/OFF slider switch (8, 9)
downwards to the OFF position until the red
area appears behind the slider switch. The
alarm clock is now deactivated. The alarm
clock symbol (1, 2) disappears from the display.
• Push the ALARM ON/OFF slider switch (8,
9) back up to the ON position to activate the
alarm clock for the next day.
Snooze function
• During the alarm signal, press the Snooze/
Light button (6) to activate the snooze
function. The alarm signal is interrupted for 8
minutes and then triggered again.

5.4 Summer time

• The time adjusts automatically to summer time.
While summer time is active, the DST symbol
(4) appears on the display.

5.5 Temperature display

• Press and hold the Up button (B) for around
2 seconds to switch between Celsius and
Fahrenheit.

5.6 Backlight

• Press the Snooze/Light button (6) to
illuminate the display for around 8 seconds.