Connecting The Hob To The Mains Power Supply - Pkm In77-2Fzs Bedienungsanleitung

Connecting the hob to the mains power supply

This hob must be connected to the mains power supply only by a suitably
qualified person
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power draw by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on the
rating plate. To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire. The
power supply cable must not touch any hot parts and must be positioned so that
its temperature will not exceed 75℃ at any point.
Check with an electrician whether the domestic wiring system is
suitable without alterations.
Any alterations must only be made by a qualified electrician.
CONNECTION OF THE INDUCTION HOB TO THE
ELECTRICITY SOCKET:
Before connecting the induction hob to the mains, check that:
1. The electrical installation where the induction hob is to be connected must be
suitable for the power consumed by the induction hob.
2. The voltage must correspond to the nominal value specified in the
characteristics described in this manual.
To connect the induction hob to the mains socket, you must not use adapters,
reducers or branches, as these devices can become hot and cause a fire.
The power cable of the induction hob must not touch any part or area where it
acquires high temperatures and must be positioned so that the temperature will
not exceed 75˚C at any point.
Check with a licensed and qualified electrician for proper electrical installation.
Any modification to the electrical installation must only be carried out by a
licensed electrician.
The electrical connection of the induction hob must be carried out in accordance
45