Error Codes - Pkm In4-2Fzsa Bedienungsanleitung

➢ Cookware cannot be detected,
because it is unsuitable, too small or
improperly
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
➢ Technical malfunction.
If the appliance shows a malfunction not noted on the schedule above or if
you have checked all items on the above schedule but the problem still exists,
please contact the aftersales service.

8.1 Error codes

Failure code
Ceramic plate temperature sensor failure--
E1
open circuit.
Ceramic plate temperature sensor failure-
E2
-short circuit.
Eb Ceramic plate temperature sensor failure
E3 High temperature of ceramic plate sensor.
Temperature sensor of the IGBT failure
E4
--open circuit.
Temperature sensor of the IGBT failure
E5
--short circuit
E6 High temperature of IGBT.
E7 Supply voltage is below the rated voltage.
E8 Supply voltage is above the rated voltage.
U1 Communication error.
C
AUSES
C
OOKWARE DOES NOT BECOME HOT AND
THE RELEVANT SYMBOL IS DISPLAYED
positioned on
(
22
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
Problem
No Auto-Recovery
E
RROR
➢ Use suitable cookware which meets
the diameter of the cooking zone.
the Place cookware on the centre of the
cooking zone.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
DISPLAY
➢ Note the complete error code
disconnect the appliance from the
mains and contact the aftersales
service.
Check the connection or replace the
ceramic plate temperature sensor.
Wait for the temperature of ceramic plate
return to normal.
Touch "ON/OFF" button to restart unit.
Replace the power board.
Wait for the temperature of IGBT return to
normal.
Touch "ON/OFF" button to restart unit.
Check whether the fan runs smoothly;
if not , replace the fan.
Please inspect whether power supply is
normal.
Power on after the power supply is normal.
Reinsert the connection between the
display board and the power board.
Replace the power board or the display
~ ~
101
board.
M
EASURES
.
).
Solution
,
23