Adjusting The Height Of The Upper Rack; Removing The Upper Rack (For Some Models) - Samsung DW60H9970U Series Benutzerhandbuch

ADJUSTING THE HEIGHT OF THE UPPER RACK

You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can
accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can
accommodate plates up to 12 in. (30 cm) in diameter and the upper rack can accommodated plates up to
8 in. (20 cm) in diameter.
1. To lower the upper rack by 2 in. (5 cm), pull
the adjust handles located at the left and
right sides of the upper rack, and then push
the upper rack downwards slightly at the
same time.
2. To raise the upper rack, just pull the upper
rack upwards. The adjuster handle will latch
and the upper rack will move to the high
position.
We recommend adjusting the height of
the upper rack before loading dishes into
CAUTION
the rack. If you adjust the the rack after
loading the dishes, you may damage the
dishes. If you do not adjust with left and
right handle together, the dishwasher door may not close properly.
Pull out the upper rack from the tub until it is fully revealed before adjusting the upper rack.

REMOVING THE UPPER RACK (FOR SOME MODELS)

You can remove the upper rack to accommodate extra large items in the bottom rack. Take care that
you do not lose the holder rails during this process.
To remove the upper rack from the slide rail, pull the upper rack out from the tub until it is fully extended.
Hold down the holder rails on both sides to release the upper rack. Slide the upper rack out to the end of
one holder rail, and then lift it up.
Repeat the steps above with the other holder rail.
Step 1.
User Manual_DW9000H-Series-00156A-03_EN_150112.indd 23 User Manual_DW9000H-Series-00156A-03_EN_150112.indd 23
Step 2.
English - 23
Step 3.
2015-01-12 2015-01-12 2:38:40 2:38:40