Herunterladen Diese Seite drucken

Pfaff hobbymatic 904-1 Bedienungsanleitung Seite 54

Werbung

4
Zippers in ladies' slacks
For machine setting see page 46.
Engage the zipper foot on the right.
Press the edges of the placket. Baste
the closed zip to the right edge of the
placket on the reverse fabric side so
that its teeth are still visible. Pin facing
strip 0 to the underside and stitch it
down at the same time as you sew the
zip. The zip teeth run along the right
guiding edge of the foot (Fig. N>.
Shortly before the end of the seam.
leave the needle down in the fabric,
raise the zipper foot, open the zip,
lower the zipper foot again and finish
sewing the seam. Close the zip.
Pin the overlapping edge along the
intended seam line. Baste left zip edge
(Fig. 01.
Open zip. Attach the edge guide and
position it for the desired seam margin
so that it moves along the edge of the
fabric (Fig. P1. Shortly before the end of
the seam, leave the needle down in the
fabric, raise the zipper foot and close
the zip. Lower the zipper foot and finish
sewing the seam. Secure the end of the
zip seam with a bartack.
Hosenrei1verschluB (Damen(
MaschinenEinste(lung siehe Seite 46.
Den Reilverschlu1fuP, rechts einrasten.
Die Schlitzkanten bügeln. Den geschlos
senen ReiP,verschluE, so unter den rech
ten gebugelten Schlitzrand heften, dal,
die Rei1,,verschluRzähne noch sichtbar
sind. Vorbereitete Untertrittsleiste 0
anstecken und beim Aufsteppen mit
fassen. Die Reilverschlulzähne laufen
am rechten Fuhrungssteg entlang
(Abb. N). Kurz vor Nahtende Nadel im
Stoff stehen lassen, NähfuS anheben,
ReiP,verschluP, öffnen. NähfuR senken
und die Naht fertig nähen. Den ReiPver
schluR schlleRen.
Ubertretenden Schlitzrand nach Nahtver
lauf zustecken. Linke ReiRverschluRseite
einheften (Abb. 01.
ReiRverschluR Offnen. Das Fuhrungs
lineal anbringen und auf die Abstepp
breite so ausrichten. daR das Führungs
lineal an der Kante des Stoffes entlang
(äuft (Abb. P1, Kurz vor Nahtende Nadel
im Stoff stehen lassen, NähfuR anhe
ben, ReiRverschluR sch(ieRen, NähfuR
senken und die Naht fertig nähen. Das
Ende der ReiRverschluRnaht
dtirch einen
IRiegel sichern,
48

Werbung

loading

Diese Anleitung auch für:

Hobbymatic 946-1Hobbymatic 919-1Hobbymatic 904-1