Combinations Of Carrying Systems; Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl Kma 200.0 R Gebrauchsanleitung

English
Cutting attachment
– Grass cutting blade 250-40
(Ø 250 mm)
– Grass cutting blade 250-44
(Ø 250 mm)
– Grass cutting blade 260-2
(Ø 260 mm)
– Brush knife 250-3 (250 mm
diameter)
22 Combinations of Carrying
Systems
22.1 Combinations of Carrying Sys‐
tems
Approved carrying systems are listed in this user
manual:
Shoulder strap
Full harness
23 Spare Parts and Accesso‐
ries
23.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

24 Disposal

24.1 Disposing of the KombiEngine
and battery
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
40
Deflector Barrier bar

22 Combinations of Carrying Systems

Carrying System
► Do not dispose with domestic waste.
25 EC Declaration of Con‐
formity
25.1 STIHL KMA 200.0 R KombiEn‐
gine
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
– Designation: Battery KombiEngine
– Manufacturer's brand: STIHL
– Model: KMA 200.0 R
– Serial identification number: FA03
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in conjunction with the KombiTools lis‐
ted in this user manual to comply with the follow‐
ing standards in the versions valid on the date of
production: EN 55014-1, EN 55014-2, EN 62233,
EN 60335-1, EN 62841-1 and EN ISO 12100,
taking into account the standards
EN 60335-2-72, EN 50636-2-92,
EN 50636-2-100, ISO 11680-1, EN 62841-4-1,
EN 62841-4-2 and EN 62841-4-4.
The KombiEngine described here may be oper‐
ated only in conjunction with one of the Kombi‐
Tools listed in this user manual.
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and machine number are shown on the Kom‐
biEngine.
Waiblingen, 2023-10-15
ANDREAS STIHL AG & Co. KG
0458-192-9801-A