Power Connections - Expolite LED-PROFILE XAL LED22960 Bedienungsanleitung

2.0 INSTALLATION
2.1
MOUNTING
HANGING: The LED fixture
can be mounted in a hanging
position using the supporting
bracket. The bracket should
be secured to the mounting
truss or structure using a
standard mounting clamp.
Please note that when hanging
the unit a safety cable should
also be used.
2.3

POWER CONNECTIONS

220~240V: 7 units may be connected in series
110~120V: 3 units may be connected in series
NOTE!
If the signal cable is over 60 m between the DMX512 controller
and fixture or beween two fixtures, then a DMX signal amplifier is
needed as well.
25