Werbung
Verfügbare Sprachen
Verfügbare Sprachen
frames of other manufacturers" on page 12).
Place the push-button rocker (C) with the already
•
inserted adapter (B) into the clip-on frame, so that
both latching lugs fit into the existing elongated
holes (see figure 3).
4
Mounting into frames of other
manufacturers
An over of compatible frames of other manu-
facturers can be found in the download area at
www.homematic-ip.com
5
Maintenance and cleaning
The button rocker is maintenance-free. Enlist the
help of an expert to carry out any maintenance.
Clean the device using a soft, lint-free cloth that
is clean and dry. You may dampen the cloth a litt-
le with lukewarm water in order to remove more
stubborn marks. Make sure that no moisture will
ingress into the actuator. Do not use any deter-
gents containing solvents, as they could corrode
the plastic housing and label.
Mounting into frames of other manufacturers
11
Werbung
