Energy Efficiency Monitor - clage DSX SERVOTRONIC MPS Gebrauchsanleitung

DSX
3. How to use
Menu item order of

"Energy Efficiency Monitor":

CLAGE (CLOCK)
POWER
FLOW
TEMP IN
TEMP OUT
COSTS PER HOUR
ENERGY LAST TAPPING
COSTS LAST TAPPING
WATER VOLUME LAST TAPPING
TOTAL ENERGY
TOTAL COSTS
TOTAL WATER VOLUME
Energy Efficiency Monitor
In the top row of the display, various information can be displayed permanently.
If you press the info key
played as scrolling text. To continue to the next monitor, press the info key
time while the scrolling text is visible. The name of the monitor will appear as scrolling
text.
After the scrolling text, the value of the currently selected parameter will be displayed
permanently in the top row of the display.
Individual parameter as follows:
CLAGE (or Clock, if enabled)
This is the normal display mode without an activated Energy and Status Monitor. If the
clock was enabled in the Setup menu, it is only shown in normal display mode.
Note:
The menu items "Power", "Flow", "Temp In", "Temp Out" and "Costs per hour" are
explained in the chapter "Info Menu".
Energy last tapping
Energy consumption since opening the hot water tap in Wh or kWh.
Costs last tapping
Indication of the costs since opening the hot water tap.
Water last tapping
Display the amount of water since opening the hot water tap in litres.
Total energy
Display of the total accumulated energy consumption in kWh.
Total costs
Display the total accumulated electricity costs in Euro.
Total water
Indication of the total water consumption in litres.
Note: The values are for information only and are not suitable for billing pur-
poses.
22
once, the name of the currently selected monitor is dis-
a second