Herunterladen Inhalt Inhalt Diese Seite drucken

Setup Menu - clage DSX SERVOTRONIC MPS Gebrauchsanleitung

E-komfortdurchlauferhitzer
Vorschau ausblenden Andere Handbücher für DSX SERVOTRONIC MPS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DSX
3. How to use

Setup menu

2
1
+
Press
≥ 3 sec
4
3
5
6
Display flashes
9
8
Menu item order of "Setup menu"
LANGUAGE
TONE
BACKGROUND LIGHT
CHARGES PER KWH (CT)
CLOCK
LOAD DECREASE
LOCK LEVEL
TEMPERATURE LIMIT
FLOW LIMIT
Note: Values of the Info menu cannot be modified or entered. Above mentioned values are
only given for your information!
Note: The values are for information only and are not suitable for billing purposes.
Setup menu
The setup menu offers a variety of adjustabilities, affecting the performance and
the display of the appliance.
Press the setup key
up the setup menu, the display confirms by " setup ".
Using the arrow keys
setting mode of the individual parameter (e.g. tone) is activated by pressing the setup
key
, the display flashes. You can now select the new parameter value with the
arrow keys
The new parameter value is stored when pressing the setup key
key
you will get back to the standard display.
7
Individual parameter as follows:
Language
Operating language can be selected.
Setting options:
"1"
German
"0"
English
Tone
Activation and deactivation of key tone.
Setting options:
"on" key tone activated
"--" key tone deactivated
Background light
Activation and deactivation of display background light
Setting options:
"on" background light constantly on
"At" background light switches on automatically e.g. when keys are pressed, and switches off
automatically after some time
"--" background light off
Charges per kWh (ct)
The relevant electricity tariff can be entered.
Setting options:
from 0 ct to 199,90 €
Clock
Time settings can be done
Setting options:
"h"
hours
"min" minutes
"s"
seconds
The info key
The arrow keys
Pressing the setup key
With info key
Note:
and the info key
and
you can switch over to the individual parameters. The
and
.
selects the clock parameter to be changed ("h","min" or "s").
and
changes the set value shown.
stores the new value.
you will get back to the standard display.
20
simultaneously for at least 3 seconds to call
again. With info

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis