When the device is connected to
the power supply, the travel lock is
automatically deactivated so that
the device can be used in mains
operation right away.
7. USAGE
1. Place the stainless steel blade
device from above until it clicks into place.
To remove the stainless steel blade
press it upwards with your thumb.
2. If necessary, select one of the six comb at-
tachments
2
steel blade
. Slide the comb attachment
1
as far as it will go along the stainless steel
2
blade
. We recommend that you start with
1
the comb attachment
with the longest cutting
length initially so you
can then slowly work
your way up to your de-
sired length.
3. Press the ON/OFF control
the device. The LED display
light up.
4. Guide the device slowly through the hair. En-
sure that the comb attachment sits as flat on
the head as possible. Always only trim small
areas. Cut the hair against the direction of
growth. If the hair grows in di erent direc-
tions, use the device in multiple directions.
5. To switch o the device after use, press the
ON/OFF control
turns o .
1
and place it on the stainless
to switch on
4
begins to
5
. The LED display
4
8. CLEANING AND
MAINTENANCE
8.1 Cleaning the device
WARNING
• Risk of electric shock! Always disconnect
the device from the power source before
onto the
cleaning it.
• Risk of fire! Do not clean the device with
again,
1
highly flammable liquids!
• Do not clean the device in the dishwasher!
• The device is not waterproof. The stainless
steel blade
under running water for hygienic cleaning.
1. For thorough cleaning, remove the stainless
steel blade
upwards.
2. Leave the stainless steel blade
completely before reattaching it to the device.
8.2 Oiling the stainless steel
blade
To achieve consistently optimal cutting results,
spread a little cutting oil on the stainless steel
blade
9. ACCESSORIES AND
REPLACEMENT PARTS
To purchase accessories and replacement parts,
please visit www.beurer.com or contact the cor-
responding service address (according to the
service address list) in your country. Accessories
and replacement parts are also available from
retailers.
5
19
can be removed and rinsed
1
from the device by pulling it
1
on a regular basis.
1
to dry
1