Beurer MN5X Gebrauchsanweisung Seite 18

5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
1 Stainless steel blade
6 comb attachments (3–25 mm)
2
4-level precision adjustment:
3
0.6 / 1.2 / 1.8 / 2.4 mm
4 ON/OFF control
LED display with battery status in %,
5
charge indicator and travel lock
indicator
Connection socket
6
7 Storage bag
8
USB charging cable
9 Cutting oil
10 Cleaning brush
6. INITIAL USE
You can operate the device with
the battery as well as a mains
adapter (not included in delivery).
To charge the device, only use
a mains adapter of protection
class 2 (
for use with household appliances
and with an output corresponding
to the safety extra-low voltages of
5 V and max. 1 A.
6.1 Battery mode/charging the
battery
You must fully charge the battery for 3 hours
before the first use. The device will run for ap-
prox. 4.5 hours when fully charged. If the battery
charge level is less than 20%, the LED display
will show "Lo" for "Low" and flash.
5
) which is approved
1. Connect the USB charging cable
connection socket
(not included in delivery).
2. Insert the mains adapter into a suitable sock-
et. The LED display
battery status in % and the charge indica-
tor flashes.
3. As soon as the LED display
"100%" and the charging symbol is perma-
nently illuminated, the battery is fully charged.
The device is now ready for use.
6.2 Mains operation
 DANGER
Risk of electric shock! Never use the device in
the shower or in a damp environment when it is
in mains operation mode!
1. Connect the USB charging cable
connection socket
(not included in delivery).
2. Insert the mains adapter into a suitable sock-
et. The device is now ready for use and the
battery is charging.
6.3 Travel lock
The travel lock prevents the device from being
switched on by accident (e.g. when being carried
in a suitcase).
1. To activate the travel lock, press and hold the
ON/OFF control
lock symbol lights up. The travel lock sym-
bol flashes during activation. As soon as the
travel lock is activated, the travel lock symbol
lights up continuously for a short time.
2. If the ON/OFF control
when locked, the travel lock symbol will al-
so light up.
3. To deactivate the travel lock, press and hold
the ON/OFF control
travel lock symbol flashes during deactiva-
tion. As soon as the travel lock is deactivated,
the travel lock symbol goes out. The device
can be switched on by pressing the ON/OFF
control again.
4
18
8
and a mains adapter
6
shows the current
5
5
8
and a mains adapter
6
for 3 seconds. The travel
4
is briefly pressed
4
for 3 seconds. The
4
to the
shows
to the