Stalgast 721129 Bedienungsanleitung Seite 13

7. CLEANING AND MAINTENANCE
Caution: Before cleaning the device must be turned off and disconnected from the power source.
• Before leaving the device it is necessary to disassemble the grinding mechanism and wash its components in hot
water using a detergent.
• Do not clean the device using water under pressure.
• All maintenance work should be carried out on a device disconnected from the power source.
• Do not clean the device using caustic, abrasive and corrosive agents.
After washing and drying the device apply a small amount of cooking oil on parts from "b" to "i" in order to ensure their
proper lubrication.
8. FAULTS, CAUSES, SOLUTIONS
In the event of any disturbing behaviors during the operation of the device, please contact your authorized service
center or the seller.
9. DISPOSING FOR USED EQUIPMENT
Information for users about the proper principles of disposal of waste electric and electronic equipment
• Leave the old device in the store where you are buying a new device. Each store has an obligation to take your old
equipment free of charge if you buy new equipment of the same type and in the same quantity. The only condition
is to deliver the equipment to the store at your own expense.
• Take the used device to a collection point. You will find information about the nearest location on the municipal
website or bulletin board of the municipal office.
• Leave the device at the service point. If the repair of the device is uneconomical or impossible for technical re-
asons, the service is obliged accept the device free of charge.
• Return used equipment without leaving your house. If you don't have the time or ability to transport your equipment
to a collection point, you can use the services of specialized companies.
Remember! Do not dispose of used equipment along with household waste.
This could cause high fines.
The symbol of the crossed-out waste bin on the product, its packaging or the instruction manual means
that the product should not be disposed of to normal waste bins. The user is obliged to hand over the used
equipment to a designated collection point for proper processing.
10. WARRANTY
The dealer of the appliance is liable under the guarantee.
The guarantee does not cover any damage resulting from the build-up of limescale inside the appliance. The guaran-
tee also does not cover: damage caused by external forces such as atmospheric discharge, voltage change, incorrect
setting of electrical voltage, power supply from unsuitable power outlet, any mechanical, thermal, chemical damage
and defects resulting from them.
Furthermore, the guarantee does not cover the replacement of exhaustible parts, namely: light bulbs, rubber elements,
heating elements damaged by limescale, glass and other elements that are exposed to any form of wear or usage, for
example; burners, rubber units as well as any breakdowns or mechanical damage of the appliance elements caused by
incorrect storage, transport, maintenance, installation or operation
11. DECLARATION OF CONFORMITY
Meets the essential requirements:
• MD 2006/42/EC Machinery Directive,
• LVD low voltage directive 2014/35/EU
• EMC compatibility directive 2014/30/EU,
• FCM 1935/2004 regulation for food contact products,
Meets the requirements of the following harmonized standards:
• EN 55014-1:2006+A1:2009
• EN 55014-2:1997+A1:2001+A2:2008
• EN 61000-3-2:2014
• EN 61000-3-3:2013
• EN 60335-1:2012+A11:2014
• EN 60335-2-64:2000+A1:2002
• EN 62233:2008
• EN 1672-1:2014
• EN 12331:2022
- 13 -