Safety Instructions - Rotel Rt-845Ax Kurzanleitung

SAFETY INSTRUCTIONS
Read Instructions
operating instructions should be read before
CAUTION
the appliance is operated.
RISK OF ELECTRIC SHOCK
2. Retain Instructions
00 NOT OPEN
operating instructions should be retained for
future reference.
: CAUTION TOREDUCE T HERISKOFUECTR!C SHOCK.
DONOT REMOVECOVER BACKI 3. Heed •Warnings
applia%ee ånd inthepneratinp instructions
NO USER.SERVICEABIE PARTS INSIDE
shouldbepdheråd .to.
REFE R SERV!C/Nq t o SERVICE PERSONNEL
4. Follow Instructions
use instructions should
The lighting flash with arrowhead
5. Water and Moisture
symbol, wittun an equilateral
Shourd not be used near water —
triangle, is intended to alert the user
ttample.near a bathtub,wasFboWl. kitcheri
to the *Presencei of, uninsulated
sink. iaundry tub, in a
"dangeioüs voltageStwithin the.
near a swimming pool. and •thelike,
product'Senclosure that maybe of
Carts and Stands —Theappliance SÄould
6.
sufficignt magnitude-to Constitutéa
be used only with a cart or stand that iS
risk Of electric shock to persons.
recommended by the månufacturer.
The exclamation point within
6A. An appliance and cart combination-should
an equilateral triangle is intended
be moved with care. Quick stops,
to alert the user to the presence
force, and uneven surfaces r.pgycause the
of important operating and main-
appliance and cart combination to overturn.
tenance (servicing) instructions in
7. Wall or Ceiling Mounting — .Ttpe appliance
the literature accompanying the
should be mounted to a wall o?ceiling only
appliance.
as recommended
ITEM 6A: 8. Ventilation — The applianCe should be
situated so that its locatioö or position $bes
PORTABLE
not interfere with its proper ventilation. For
WARNING
example, the appliance
situated on a bed, sofa, rug, or similar
surface that may block
S3125A openings; or,placed in a built-in installation.
such as a bookcase or cabinet that may
"Note to CATV system installer:
impede the flow of air through the ventila-
This reminder is provided to call the CATV
tion openings.
system installer's attention to Article 820-22 of
9. Heat — The appliance should be situated
the NEC that providesguidelinesfor proper
away from heat sources such as radiators.
grounding and. in particular. specifies that the
heat registers. stoves. or other appliances
cable groundshallbe connected to the groun-
(including amplifiers) that produce heat.
ding system of the building. as close to the
10. Power Sources — The applianceöhouid be
point of cable entry as practical."
connected to a power supply only ot the type
described in the operating instructions or as
marked on the appliance.
Power Lines —An outdoor antenna should be
located away from pov€er lines.
Outdoor Antenna Grounding — If an outside
antenna is connected to the receiver. be sure
the antenna system is grounded so as to pro-
vide some protectionagainstvoltage surges and
built up static charges. Section 810 of the
National Electrical Code, ANSI/NFPA No.
70—1984. provides information with respect to
proper grounding of the mast and supporting
structure. grounding of the lead-in wire to an
antenna discharge unit, size of grounding con-
ductors, locationof antenna-dischargeunit. con-
nection to grounding electrodes. and re-
quirementsfor the groundingelectrode.See
Figure.
ause No. 10 AWG (5.3 mm2)copper, No. 8
AWG (8.4 mrn2) aluminum, No. 17 AWG (1 .O
mm2) copper-clad steel or bronze wire, or
larger, as a ground wire,
bSecureantennalead-inand ground wiresto
house with stand-off insulators spaced from
Use jumper wire not smaller
4—6 feet (1.22—1.B3 m) apart.
(13.3 mm2) copper, or the equivalent, when a
cMountantenna dischargeunitasClose aspos-
separate antenna-grounding electrode isused,
Sible to where lead-in enters house.
see NEC Section 810-21 (j).
1
— All the safety and Grounding or Polarization — The pres
11
cautions that should be taken so that the
grounding or polarization means of an
— The safety and appliance is not defeated.
Power-Cord Protection — Power-supply
12.
cords.shouidbe routed so that. they are not
tob?walked onor pinched by items
— All warnings on thé
placed upon or against 'tpem. paytng par-
ticular „atte.ntion to cords at plugs, cqn-
— All operating and venience receptacles. and the point where
be followed. they exit from the appliance.
— The appliance 13. Cleaning — The appliance Should be
for ex- cleaned only as recommended by the
manufacturer.
or
Nonuse Periods — The power cord of the
14.
appliance should be unplugged from the
, outlet when left uhused for a long period cit
time.
15. Object and Liquid Entry — Care should be
taken so that objects do not fall and liquids
are not spilled into the enclosure through
Openings.
Damage Requiring Seviée
16.' The
appliance shbuld be serviced by qualified
factory authorized service personnel when:
by the manufacturer.
A. The power-supply cord or, the plug has
been damaged: or
B. Objects have fallen, or liquid has been
spilled into the appliance: or
should not be C. The appliance has been exposed to rain:
or
the ventilation D. The appliance does not appear to operate
normallyor exhibits a markedchange in per:
formance; or
E. The appliance has been dropped. or the
enclosure damaged
Servicing — The user should not attempt
17.
to service the appliance beyond that
described in the operating instructions. All
other servicing should be referred to
qualified factory authorized service person-
nel.
FIGURE
EXAMPLEOF ANTENNA GROUNDING AS peg cooe
CONTAINED . RADIO AND
GROuNC CLAMP
SERVCE EN'RANCE
CONOUC'ORS
SERVCE
L ELO
ENTRANCE
EOulPMENT •
Gpouyo cuups
ANtENNA
t»scHARGE
TO EXTERNAL ANTENNA
pow* SERVICE GAO•.JNOING or PAOouC'
GROuN0 b
GROUND CLAMPS
opri0NAL ANIENNA GROUND'NG ELECVROOE
fEEf
than No. 6 AWG
REOuÄED BY LOCALCODES SEE NEC
SEC'ON
FOR U.S.A. ONLY
ENGLISH
AM/FM STEREO TUNER RT-845AX
LW/MW/FM STEREO TUNER RT-845AXL
INTRODUCTION
We at Rotel want to thank you for purchasing our audio
product.
Rotel audio products are designed to use the latest electronic
technology, and' they incorporate our long experience as a
specialist manufacturer of audio equipment. We are
confident that you will find satisfaction in the high quality
sound and top performance, and that you will find pleasure
in the functional beauty achieved through human-engineering
concept. Before starting operation, please read this instruc-
tion manual thoroughly and acquaint yourself with the pro-
per mode of using the unit and all its connections.
We hope you will enjoy top-notch performance for many
years to come.
INSTALLATION
Be sure to place the unit in a level and flat place where it
is free from humidity, vibration, high temperature and not
exposed to direct sunlight. Be careful not to place the unit
in a highly enclosed place such as near a wall or on a
bookshelf. A poor ventilation will cause undesirable effects
to the unit.
POWER SUPPLY CONNECTION
For power the unit requires the normal house electrical
current (AC). You may simply plug the unit into a wall
outlet, or into your amplifier's convenience AC outlet.
CAUTION: Do not apply power without first making sure
the proper connections are completed. If you live in U.K. and
your unit comes with 2-core cord without a plug, be sure to
read the exclusive caution for U.K.
EXCLUSIVE NOTE FOR U.K.
If your unit comes with a 2-core cable without a plug,
make certain live and neutral leads are connected to
the proper terminals. Check that the terminals are
screwed own firmly and no losse strands of wire are
present.
IMPORTANT: The wires in this mains lead are cloured
in accordance with the following code;
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed
as follows. the wire which is coloured BLUE must be
connected to the terminal which is marked with the letter
N or coloured BLUE or BLACK.
The wire which is coloured BROWN must be connected
to the terminal which is marked with the letter L or
coloured BROWN or RED.
CUATION:
To prevent electric shock do not use this (polarized)
Plug with an exension cord, receptacle or other
outlet unless the blades can be fully inserted to prevent
blade exposure.
CONNECTION TO INTEGRATED AMPLIFIER
Using RCA pin cords, securely connect the OUTPUT ter-
minals on the rear panel of the unit to the TUNER (or AUX)
terminals of amplifier. Make absolutely sure that RIGHT
terminal of one unit is connected to the RIGHT terminal
of the other, and LEFT to LEFT
AMPLIFIER
RT-845AX
0000
o OR
ANTENNA INSTALLATION AND CONNECTION
FM Antenna
Proper installation of antenna is the key to smooth signal
reception. To install the attached T-shape indoor antenna,
stretch it out and secure horizontally along a wall or the
like in a location where signal reception is optimal. Be sure
securely connecting T-shape antenna leads to the FM anten-
na conversion plug (marked 300 ohm) and hook up FM con-
version plug to FM antenna terminal marked 75 ohm on rear
panel. If outdoor type FM antenna is installed, the T-shape
antenna is not necessary. For proper use of your outdoor FM
antenna, follow the instructions below.
1. Be sure to select the most appropriate type of antenna
for the signal reception conditions in your area.
2. A 75-ohm coaxial cable is recommended in connecting
the antenna to the unit.
3. Set the antenna in a position as high as possible if
buildings, mountains or other obstructions nearby affect
reception.
4. The 75 ohm coaxial antenna cable is to be connected
FM antenna terminal marked 75 ohm.
Indoor T-shape Antenna
(T-shape IndoorAntenna for European Versionis optional)
750 Coaxial Antenna
To out door
2