Network Configuration - T+A Cala Betriebsanleitung

General
Information
   
Compatible
hardware and
UPnP servers
Network
Configuration
Menu
 
 

Network Configuration

The   can be operated in wired LAN networks (Ethernet LAN or
 
Powerline LAN) or in wireless networks (WLAN).
If you wish to use your 
the necessary network settings on the 
network parameters such as the IP address etc. both for wired and
wireless operation. If you wish to use a wireless connection, a number of
additional settings for the WLAN network also have to be entered.
In the following sections we assume that a working home network
(cable network of WLAN network) with router and (DSL) Internet
access is present.
If you are unclear about some aspect of installing, setting up and
configuring your network, please address your queries to your network
administrator or a network specialist.
The marketplace offers a vast number of routers, NAS devices and USB hard
discs made by a very wide range of manufacturers.  equipment is
generally compatible with other makes of machine which bear the UPnP label
All network settings are entered in the Network Configuration menu. This
menu will vary slightly in appearance depending on the type of your
network, i.e. whether you have a wired (LAN) or wireless (WLAN)
network.
If in the Network Configuration Menu the entry 'Network IF Mode' is set to
'auto', the   will check automatically if a LAN connection to a network
 
is present. If a LAN connection is found, the machine will assume that
this is to be used, and displays the network configuration menu for LAN
networks.
If no LAN network is connected, the 
displays the WLAN configuration menu when you call up the
configuration menu. The menu for a WLAN network includes a number of
additional menu points. The following sections explain how to use the
menu, and the meaning of the individual menu points.
The Network IF Mode 'auto' is the default factory setting. In case of
problems in combination with your hardware this automatic function can
be switched to a fixed operation mode, e.g. only LAN.
 in your home network, you must first enter
 
 . This includes entering the
 
 activates its WLAN module and
 
72