Basic Functions Of The; Source Switching; Volume Control; Tone Settings (Tone Menu) - T+A Cala Betriebsanleitung

The basic functions of the 
selected source.
Balance
Treble
Bass
Tone Control
Basic Functions of the 
 , described in this chapter are always available, regardless of the
 

Source switching

The source buttons are used to select the desired internal source (VHF
radio, Streaming Client) or an external source (A1 IN, A2 IN, Bluetooth
Receiver) for playback.
Once the   has switched to the internal sources they can be operated
 
using the remote control.
Please refer to the following chapters for details of operating the
individual source devices.

Volume control

The volume of the 
-  + button. A brief press on one volume button increases or
reduces the volume by one increment. Holding one of the volume buttons
pressed in causes the volume to change continuously.

Tone settings (Tone menu)

The   features a range of facilities for adjusting the sound to suit your
 
personal preferences, the system's location and your room acoustics. All
sound settings are grouped together in the tone control menu (TONE
menu).
The tone control menu is called up using the  button.
The features of the tone control menu are explained in detail in the next
section.
Adjustment range /
Options:
-75 ... 0 ...+75
-12 ... 0 ... +12
off / on

 
 can be adjusted in fine increments using the
 
Explanations:
This menu point allows you to alter the
balance between the left and right loud-
speakers in order to compensate for an
unfavourable listening position.
These two menu points are used to alter the
treble and bass settings.
This menu point can be used to disable (by-
pass) the   's tone controls.
 
To switch off the tone controls, select the
"OFF" setting. When the tone controls are
switched off, any adjustments you made to
the following menu points "BASS" and
"TREBLE" have no effect.
49