The System Configuration menu is used for adjusting the general settings of the machine. This
menu is described in detail in the following chapter.
Calling up and
operating
the menu
Menu point
Speaker
(Loudspeaker
menu)
Sub-point
Speaker-type
System settings
(System Configuration menu)
To call up the menu press the button briefly on the remote
•
control handset.
When the menu is opened, the screen displays the following Select
•
points:
• Use the / buttons to select a point in the menu.
• If you wish to change the selected menu point, first press the
button, then use the / buttons to alter the value.
• To accept the setting once you have changed the value, press the
button again.
• If you wish to quit without accepting any alteration, press the
button at any time.
• Press the button again to leave the menu.
This menu point opens a sub-menu in which the settings for the
loudspeakers can be altered.
The purpose of this menu point is to match the
loudspeakers connected to it. The calibration process ensures that
you obtain the best possible sound. Select the appropriate setting to suit
the loudspeakers connected to the machine. If you are using unlisted
speakers, or speakers made by other manufacturers, select the 'linear'
setting; in this case no matching is carried out.
51
accurately to the