Basic Settings Of The Pdt 3100 Hv; System Settings (System Configuration Menu) - T+A HV-Serie Betriebsanleitung

In the System Configuration menu general device settings are adjusted. This menu is described in detail in the
following chapter.
Calling up and operating
the menu

Basic settings of the PDT 3100 HV

System Settings (System Configuration menu)

A brief press on the  button on the remote control handset or a

brief press on the MENU/LAYER knob on the front panel calls up the
menu.
When you open the menu, the following Select points appear on the

screen:
Using the front-panel controls:
Turn the SELECT knob to select an item from the menu.

To change a selected menu item, press the SELECT knob to confirm your

choice, then adjust the value by rotating the SELECT knob.
After making the adjustment, press the SELECT knob again to adopt the

new setting.
Press the MENU/LAYER knob to quit the menu.

Using the remote control handset:
Use the  /  buttons to select an item in the menu.

If you wish to change a selected menu item, first press the  button,

and then use the  /  buttons to alter it.
After making the change, press the  button again to accept the

new setting.
You can press the  button at any time to interrupt the process; the

change is then abandoned.
A long press on the  button closes the menu.

37