Mode Of Operation - T+A Cala Betriebsanleitung

Loudness
Sub-woofer
(This menu point
only appears if an
external sub-
woofer is switched
on in the System
Configuration
menu /
Loudspeaker
menu.)
Sound
(sound fields)
Stereo /
Virtual
Surround
off / on
-15 ... 0 ... +15
The following-setup options are intended for adjusting the reproduction of
the   to suit the room acoustics.
 
Normal
Dynamic
Warm
Speech
Cinema

Mode of operation

 offers two modes of operation: STEREO and VIRTUAL
The 
 
SURROUND. In contrast to Stereo mode in Virtual Surround mode it is
possible to achieve surround effects even without the presence of
physical rear loudspeakers.
The mode of operation can be changed by the  button. The first
press on the  button displays the currently selected mode of
operation on the front display. Further button-presses toggle between the
modes of operation.
The   features a volume-dependent tone
 
control (LOUDNESS) which compensates for
the frequency-dependent sensitivity of the
human ear, and therefore of human hearing,
at very low volume levels.
This set-up option is used to switch loudness
on or off.
The volume of the sub-woofer can be
adjusted at this point. Adjust the volume of
the sub-woofer to suit the acoustic conditions
of the listening room, and the volume of the
other channels.
Linear, musical
enhancements;
recommended for normally damped listening
rooms.
Linear sound image with good dynamics and
precision
Particularly recommended for rooms with
severe damping, and loudspeakers which
tend to emphasise bass.
If you prefer a relaxed sound image with
slightly subdued treble, select the sound field
option Warm.
This option improves speech clarity in
spoken word programmes, documentaries
and sports transmissions.
Setting for use with cinema films, offering
good dialogue comprehensibility.
50
tone setting with no