Display and controls
Minutes
1
indicator
Magnet
3
Speaker
5
the device is not placed on a thick carpet or bed
when operating and it is not in the direct path of
any heat sources (e.g., heaters);
it is not placed in the path of direct sunlight;
contact with splashing or dripping water is
avoided;
the device is not in the immediate vicinity of
magnetic fields (e.g., loudspeakers);
no foreign bodies or dust can enter the device;
candles and other naked flames are kept away
from the device at all times to prevent the spread
of fire.
Seconds indicator
2
ON/OFF-switch
4
Battery
6
compartment
- 18 -
- 20 -
Fold-out stand
7
S-button
9
(seconds)
Attach or set up the device securely
The device is not designed to be used in rooms
with a high humidity level (e.g., bathrooms).
You can attach it to a metal surface using the magnet
(3) or set it up securely using the fold-out stand (7).
Protect easily damaged surfaces when attaching the
device to the wall, otherwise scratches may occur.
Make sure that
adequate ventilation is always guaranteed;
Starting up the device
Open the battery compartment of the device (6).
Insert the supplied batteries with the correct
polarity.
Close the battery compartment (6).
Remove the protective film from the device's
display.
Switch the device on (ON) using the on/off
switch (4) on the back of the device.
The entire display will become visible.
A tone sounds when you touch the buttons.
You can enter numeric values of 0 to 99 minutes
and/or 0 to 59 seconds.
ST/SP-button
8
(start/stop)
M-button
10
(minutes)
- 19 -
- 21 -