SCALANT Forst Swing Montageanleitung Seite 15

Forst Outdoor Sofa Swing Assembly Instructions
5) Assembly
Step 1
Start by placing the base cover (pos. 2) on the base (pos.1). The center strut
(pos. 3) is then fastened to the base using the hexagon screw (pos. 15).
1
3
Step 2
Then fasten the side parts (pos. 4) to the center strut. Use the cylindrical
screw (pos. 12), the lock nut (pos. 13) and 2 washers each (pos. 14). But do
not tighten the screws yet.
The cross struts (pos. 5) are used in the next step. Fasten them with the
cylindrical screw (pos. 10) and a washer (pos. 11). When everything is
connected, tighten all screw connections.
3
2
4
-15-