SCALANT Forst Swing Montageanleitung Seite 14

Forst Outdoor Sofa Swing Assembly Instructions
4) Required tools
Cordless screwdriver with Torx bit T20
Screwdriver (Torx 20)
Tape measure/Folding ruler
Hammer
Tapping block
Wrench size 13 mm
Drill bit Ø 1.5 mm
The fixing material for fastening the outdoor sofa to the ground is not
included.
Please check all screw connections on the outdoor sofa at regular intervals.
No liability is accepted for damage caused by improper assembly.
-14-