Connections, Operating And Display Elements - Cameo CLPFLAT1TWIRWH Bedienungsanleitung

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1
POWER IN/FUSE
IEC mains input socket with fuse holder. Operating voltage 100–240 V AC / 50–60 Hz. Connection using the IEC power cable supplied. Fuse
F3AL/250 V (5 x 20 mm). IMPORTANT: When replacing the fuse, only use a fuse of the same type and value. In the event of repeated fuse
failure, please contact an authorised service centre.
2
DMX IN
3-pin male XLR socket for connection to a DMX control device (e.g. DMX console).
3
DMX OUT
3-pin female XLR socket for sending the DMX control signal.
4
POWER OUT
IEC power output socket. Facilitates power supply to other CAMEO lights. Ensure that the total current consumption of all connected devices
does not exceed the value specified on the device in amperes (A).
1
3
5
6
2
4
5