Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PRODUCT INSTALLATION
Installation Procedures
1 Install the base
Align the column with the groove on the base and fix them together using a 7-shape
bolt.
2 Column installation
2.1 Pull out and fix the inner column tube by adjusting the height adjustment knob
(height can be adjusted as required).
Height adjustment knob
tighten clockwise, loosen
counterclockwise
2.2 Install and fix the device by adjusting the tightening knob.
Tightening knob
tighten clockwise, loosen
counterclockwise.
06
EN
Werbung
