Midea MFS400M0APW0 Bedienungsanleitung Seite 18

Additional Conventional Warranty Conditions
� The products imported by Midea Italia s.r.l. (hereinafter "Midea") and marked with the trademark. "Midea" are covered by the legal warranty for lack of
conformity, which is provided for in Articles ��-��� of the Consumer Code and for which the seller is liable in respect of goods sold in its sales outlets. For the
period of two years from the time of purchase, the consumer may at any time benefit from the legal guarantee covering conformity defects existing at the time of
delivery, and provided that the conformity defect is reported to the seller within two months from the date of discovery of the defect. On the basis of agreements
with its vendors, Midea provides technical support services for products covered by the legal warranty through its network of Authorised Service Centres
(hereinafter referred to as the "ASC");
� Furthermore, Midea Italia s,r,I. a sole shareholder with registered office in Milan, �����, largo Guido Donegani � (hereinafter referred to as "Midea") offers an
additional conventional warranty for a period of two years from the date of purchase on all Midea branded products (hereinafter referred to as the "Products")
marketed by Midea itself in the territory of the Italian Republic (with the exclusion of the territory of the city of Venice and the smaller islands), in the territory of
the Republic of San Marino and in the territory of the Vatican City, when installed and used in the same states and territories (hereinafter referred to as the
"Territory") and when accompanied by the present Conventional Warranty Certificate (hereinafter referred to as the "CWC").
Additional conventional warranty conditions
� This document contains the warranty conditions recognized by Midea Italia, s.r.I. (hereinafter "Midea") with reference to the Products marketed and installed in
the Territory and accompanied by the CWC.These conventional warranty conditions respect the rights recognized to the consumer of D.Lgs.n.���/���� and the
following amendments and additions (hereinafter, the "Consumer Code") and by Articles ���� bis et seq. of the Italian Civil Code and, in any case, do not limit,
exclude or prejudice the consumer's right to benefit from the guarantee of conformity for which the seller is responsible.
� The Conventional Warranty offered by Midea (hereinafter the "Conventional Warranty") is effective and applicable only in respect of and in favour of the
purchasers of the Products having the characteristics and quality of consumers, as defined and established by the Consumer Code (hereinafter the
"Consumers"). The Conventional Warranty is therefore not effective, is excluded and cannot be invoked by the purchasers of the Products who are not
Consumers and/or who use the Products within the scope of their professional and/or entrepreneurial and/or commercial activity.
� The Conventional Warranty is valid for �� months from the date of purchase of the Product. In any event and irrespective of the date of purchase of the Product,
the Conventional Warranty loses all effectiveness and is no longer valid �� months after the date of manufacture of the Product, as determined by the serial
numbers affixed to the Product.
� The Conventional Warranty shall only be considered effective and valid if the following conditions are simultaneously and comprehensively fulfilled:
� �. The Product is accompanied by an original CWC,delivered to the buyer at the time of delivery of the Product. The CWC must be presented at the time of the
service request and to the service centre personnel at the time of the servicing.
� �. A suitable tax document is available certifying; (i) the date of purchase of the Product,(ii) the company name and correct identification of the seller and, (iii) the
type and model of Product purchased, (iv) the quality of Consumer. The tax document of purchase must be shown at the time of the request for intervention and
to the personnel of the service center at the time of the repair intervention,
� �. The labels affixed to the Product and indicating the model and characteristics of the equipment, as well as the serial numbers of the Product itself must be
intact, not altered or made illegible.
� �. the Product shall be installed by a professional installer having all licenses and certifications required by law, and shall be installed and used in compliance
with all regulations in force in the Territory of installation and in accordance with the provisions of the installation and use manuals enclosed with the Product
itself
� Midea is not responsible for any loss of this certificate and is not required to issue duplicates.
� The Conventional Warranty, when effective, consists of the repair or replacement free of charge of Product components with defects or manufacturing faults.
� Midea may arrange for the replacement of the Product with a new one, or in the event of the unavailability of such Product, with another equivalent.
� The replacement of the Product does not modify or extend the validity of the Conventional Warranty, which always starts from the date of purchase of the original
Product.
� Warranty services are provided by Midea through a network of Technical Assistance Centres (hereinafter referred to as the "TAC")authorised by Midea.
EN
� The validity of the warranty is subject to the verification of the existence of defects or defects of the components constituting the Product,carried out by an
authorised TAC.
� After the warranty period, the customer is responsible for all costs related to spare parts and labor necessary for the repair of the Product.
Exclusions
� By way of example but not limited to, some cases of ineffectiveness and exclusion of the coverage of the Conventional Warranty are listed:
a. The Conventional Warranty is ineffective and does not cover routine maintenance and periodic inspections such as; filter cleaning, filter replacement, heat
exchanger cleaning and other activities to check and set the Product or to adjust or modify plugs or cables.
b. The Conventional Warranty is ineffective and does not provide cover in the event that it is established that periodic maintenance has not been carried out or has
been carried out in an irregular manner, in accordance with the prescriptions and indications set out in the Product's instruction booklet and user manual.
c. The contractual warranty is ineffective and does not provide cover if the Product is used for non-domestic purposes, in any event, if it is used in the course of a
commercial and/or entrepreneurial and/or professional activity.
d. The Conventional Warranty is ineffective and does not offer coverage in the event of loss of parts,accessories and components of the Product.
e. The conventional warranty does not cover direct damage and faults resulting from the use of the Product in a manner not specified in the instruction manual and
the Product's user manual and in any case outside the Product's intended ratings, or from sudden changes in the mains voltage to which the Product is
connected, as well as faults caused by liquid infiltration, fire, inductive/electrostatic discharges or discharges caused by lightning, surges or other phenomena
external to the Product.
f. The Conventional Warranty is ineffective and does not offer coverage for direct or indirect damage caused by improper or negligent use of the Product or in the
event of installation or storage of the Product outside the environmental conditions provided for its correct functioning, as indicated in the user manual that
accompanies the Product.
g. The Conventional Warranty is ineffective and does not offer coverage for defects arising from the imperfect installation of the Product or, in any case, when the
Product has not been installed by a professional installer equipped with all the licenses and legal certifications.
h. The Conventional Warranty is ineffective and does not offer coverage in case of use of the Product that does not comply with what is indicated in the user manual
that accompanies the Product.
i. The Conventional Warranty is ineffective and does not offer coverage for damage resulting from leaks and spills of water or other liquids attributable to defects in
the constituent components of the product.
j. The Conventional Warranty is ineffective and does not offer coverage for direct or indirect damage caused by negligence, weather events, falling materials,
accumulation of ice in the units of the Product, accumulation of impurities or residues in the connecting pipes and connection of the Product, contact of the
Product with liquids or moisture.
k. The Conventional Warranty is ineffective and does not offer coverage for direct or indirect damage caused by tampering by unauthorized personnel and by the
use of components, spare parts or consumables not approved by Midea as suitable.
l. The Conventional Warranty is ineffective and does not provide coverage for damage resulting from the transport and handling of the Product, even if such
damage is reported to the carrier at the time of delivery.
m. The Conventional Warranty is ineffective and does not cover all parts subject to wear and tear as a result of use, such as batteries, filters, seals, buttons, doors
and doors, knobs, lamps, handles, plastic parts, accessories and similar components that are not affected by faults or manufacturing defects found in the first �
months from the date of purchase or delivery of the Product.
n. The Conventional Warranty is ineffective and does not offer coverage for damage or compensation to food, clothing and the like inserted in the product,
following its malfunction or failure.
o. The Conventional Warranty is ineffective and does not offer coverage for costs for tools or services necessary to access the Product, or for the transport of parts or
components of the Product to the installation position in the event of not easy access guaranteed to the same.
p. The Conventional Warranty is ineffective and does not offer coverage for defects attributable to technological obsolescence or other software/hardware
components provided by third parties with respect to Midea.
� The clauses contained herein may be modified exclusively by Midea; no variation or modification may be made to this document except as expressly
stated by Midea.
15