Preventing Property Damage; Degree Of Protection (Protection Class) - Crivit Rp-8192 Gebrauchsanweisung

• This product has been tested in accordance
with the safety standard DIN EN 16212:2014
and is suitable for use while skiing and snow-
boarding or while riding a motorcycle.
• Do not carry out modifications to the product
as the protection is no longer effective.
• Please ensure that the product is suitable for
your body size.
• The removable protector must always be
located at the required location during use or
the protection will be no longer effective.
• Inspect the product before each use and after
every fall for any damage (e.g. damage to
seams, belts, padding, plastic parts, etc.). A
damaged product does not provide protection
and can cause additional damage in the
event of an accident. Do not continue to use a
damaged product!
• Replace the product with a new one after a
fall or if the product is damaged.
• Always wear the product over clothing but
under a jacket in order to fix it more securely
to your body.
• Please make sure that the protector is posi-
tioned correctly in the product. The product
should fit closely to the body and not slip
while wearing it.
• Always drive safely and avoid unnecessary risk.
• Always wear the product and a helmet when
riding a motorcycle, skiing, or snowboarding.
• The product can never provide full protection
from injury. It can only reduce the severity of
the injury.
• Warning! Soiling, modifications to the prod-
uct, or incorrect use can be hazardous to the
user.
• The product does not prevent spinal injuries.
• Do not use an product that is too large as this
can cause dangerous driving conditions in
conjunction with the helmet.
• No single size is suitable for all body meas-
urements.

Preventing property damage!

• Do not expose the product to the sun for long
periods as this could cause damage to the
product.
• The material in the product is sensitive to
extreme temperatures. Its properties are
compromised in extremely high or extremely
low temperatures. The product is intended for
use at temperatures between -10 and +23
degrees Celsius.
• Avoid contact with sharp, hot, pointed, or
hazardous objects.
• The lifespan of the product depends on its
use. However the product should be replaced
three years after the date of manufacture
(Version: 06/2020) at the latest.
Degree of protection
(protection class)
Performance levels
Level 1
Average: ≤ 18 kN
Attenuation of impact
Standard Measured
average
EN 1621- XS/S (40-44):
2:2014 M (45-49):
L/XL (50-54):
< 18 kN
This protector corresponds to Protection Class 1.
• The transferred residual force for all sizes is an
average of < 18 kN.
If correctly fitted, the product protects against
the consequences of strong mechanical forces,
e.g. following a motorbike crash or while skiing
or snowboarding. The extent of injury can be
reduced by wearing the product. The product
does not guarantee physical protection.
The product cannot prevent spinal injury.
Motorcyclists, skiers, and snowboarders are rec-
ommended to wear a protector as long as this is
not understood as an invitation to carelessness
or increased risk tolerance.
The scope of the protection offered by the prod-
uct remains as long as the original properties are
unchanged. No modifications may be carried
out or repairs undertaken without consulting the
manufacturer.
Level 2
Average: ≤ 9 kN
Requirement for
average
Level 1: ≤ 18 kN
Level 2: ≤ 9 kN
GB/IE 11