Package Contents; Intended Use; Technical Data; Symbols Used - Crivit Rp-8192 Gebrauchsanweisung

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.

Package contents

1 x back protector vest
1 x instructions for use

Intended use

If used and worn correctly the protector provides
limited protection against the consequences of
strong mechanical forces such as those caused
by a fall or impact.
For example it can reduce the extent of
abrasions and bruising from a fall in the area it
protects but it does not provide a guarantee of a
complete lack of physical harm!
You can find the correct size for you in the sec-
tion 'Checking the size'.
Always use the product with suitable clothing
and other protective equipment such as a helmet
and gloves.
The product has only been tested for private use
and in accordance with DIN EN 1621-2:2014
LEVEL 1.

Technical data

This product is available in three sizes.
Check that you have selected the correct prod-
uct size measured on the length from your waist
to your shoulder.
Note! Do not use the product if it does not
fit your waist to shoulder length. Exchange it for
the correct size – see the section 'Checking the
size'.
Material: outer fabric: 100% polyester
Hem and belt at waist: 100% SBR
Cushioning foam: nitrile foam (NBR)
10 GB/IE

Symbols used

Date of manufacture (month/year):
06/2020
FB: Full Back
The product is for the full back
area. Protective equipment is worn
on the back and aims to reduce
the severity of impact injuries in the
central back area and in the area
of the shoulder blades.
1: level 1 (performance level 1)
T-: passes impact test at low temperatures
Suitable for winter sports.
Conformity with the requirements of the
PPE regulation 2016/425 (and later
modifications) as well as with the harmonised
technical standard EN 1621-2:2014 was
verified by the issuing body TÜV Rheinland LGA
Products GmbH, Tillystr. 2, D-90431 Nürnberg,
Notified Body 0197.
Full declarations of conformity are available at
http://conformity.delta-sport.com/

Safety information

• Never leave children with the packaging
materials without supervision. There is a risk of
suffocation.
• The product does not offer complete protec-
tion from injury. This product also does not
rule out spinal injuries. Always drive safely
and avoid unnecessary risk.
• Make sure the product fits correctly: the
protector must be in the middle of your spine
and must be fixed in this position using the
belt. The product must not impede or distract
the wearer. If the product does not fit properly,
it does not provide protection and can cause
additional damage in the event of an accident!
The product only offers a certain level of impact
protection to the areas of the body that it covers.