Silvercrest SMK 7000 B2 Bedienungs- Und Sicherheitshinweise Seite 13

The locally applicable gas ordinances must be complied with.
Ventilation openings must always be freely permeable and must
not be blocked.
The product must not be drilled into or burnt.
Dispose of the product in accordance with the local ordinances of
your place of residence.
CAUTION! RISK OF DAMAGE!
Improper handling of the product may result in damage to the
product.
Place the product on an easily accessible, level, dry, heat-resistant
and sufficiently stable work surface. Do not place the product at
the edge or on the edge of the work surface.
The product is on castors. Make sure that it is always on a level
surface and cannot roll away.
Avoid heat build-up by not placing the product directly against a
wall or under wall cabinets or similar.
Never place the product on or near hot surfaces (hot plates, etc.).
Do not bring the mains cable into contact with hot parts.
Never expose the product to high temperature (heating etc.) or
weather conditions (rain etc.).
Never pour liquid into the product.
Never immerse the product in water for cleaning and do not use
a steam cleaner for cleaning. The product may otherwise be
damaged.
Do not use the product if the plastic components of the product are
cracked or deformed.
Replace damaged components only with suitable original spare
parts.
Always transport and store the product upright and avoid tipping
it over.
12 GB/IE/NI/CY/MT