Personal Protective Equipment; Items Supplied; Transport / Storage; Product Description - Cleco Neotek 30-Serie Bedienungsanleitung

1
EN
a) Our insulation is not insulation in the sense of VDE
standards: Hold the device at the insulated handle
surfaces when you perform work where the screw can
strike hidden power lines or your own power cable.
Contact between the screw and a live power line
could energize metal parts of the tool and cause an
electric shock.
b) Hold the tool firmly. Be prepared for torque reaction.
c) Reaction bars are recommended in applications with
limited space and when using:
-
Inline tools used above 4 Nm.
-
Pistol tools used above 10 Nm.
-
Angle tools used above 60 Nm.
d) NEVER rest your hand on the reaction bar when
working.
e) Check that the suspension bail is properly secured to
the balancer.
► Do not exceed total length of tool cable:
Primary controller mPro(...)GCD-(...) max. 50 m.
-
Secondary controller mPro-400GCD-S(...) max.
-
30 m
► When using tool Series 70, note the following:
-
Up to 3 m tool cable can be used with a maxi-
mum of 25 m Extenstion Cable.
-
Up to 6 m tool cable can be used with a maxi-
mum of 20 m Extenstion Cable.
-
Tool cables over 6 m must not be extended.

Personal Protective Equipment

► When working with rotating parts, it is not permitted to
wear gloves.
➢
Recommendation: Freely rotating u-GUARD pro-
tected fastening tools from APEX.
► Wear a hair net, if necessary.
Power Tool Use and Care
► Only use bits or sockets designed for industrial use
with machine-controlled tools.
► Make sure that the bit or socket is securely inserted.
► Do not attach the bit or socket to the screw head at an
angle.
► Inspect the bit or socket for visible damage and
cracks. Replace damaged screw bits immediately.
► Do not open the battery.
3

Items Supplied

•
Correct tool
•
Instruction manual
•
EU Declaration of conformity
•
Warranty
4

Transport / Storage

► Transport or store in the original packaging. The
packaging is recyclable.
► If the packaging is damaged, check the product for
visible damage. Inform the transporter, if necessary,
your Sales & Service Center.
8
5

Product Description

Tool
•
Quarter turn tool cable connection
•
Configurable LED light rings
•
Clockwise/counterclockwise rotation
•
Programmable fastening parameters
•
CW / CCW indicator lights
Abb. 1-1: Functional elements 30/50/70 Series
1 Tool cable connection
2 Start switch
3 Configurable multi-function buttons
4 Configurable LED light rings
5 Motor assembly
6 Gearing
7 Attachment
8 Two-position start switch

LED Display

The LED light ring is customizable via the controller user
interface.
TM12-1109 | REV G l 2023-09
5
5
5
Apex Tool Group