Cyclical Print (435-1/-3 Only) - Testo 435 Bedienungsanleitung

56 6. Setting the instrument
The main menu is open, Menu is displayed.
testo 435-2/-4 only: Parameter
1
Press
2
Press
3
and confirm the input with
Press
4
- The settings are applied and the last shape to be set is activated.

6.2.7 Cyclical Print (435-1/-3 only)

The Cyclical Print function can be activated/deactivated. A measuring program
for cyclical printing can be programmed. This enables readings (up to 999) to
be printed in a defined measuring cycle (min. 1min). The readings are sent to a
Testo printer.
Activating c c yclical p p rinting/programming a a m m easuring p p rogram:
The main menu is open, Menu is displayed.
cyc.Print
1
Press
2
with
OK
The measuring cycle is set in the order: minutes/hours.
Press
3
.
OK
Perform the setting for hours as described in step
4
Press
5
- The instrument returns to measurement view.
- The measurement series is programmed and cyclical print can be
started with
/ to select Area and confirm with
/ to select the shape by which the area is to be described
/ to set the parameter(s) and confirm each one with
.
OK
/ to select Off (deactivated) or On (activated) and confirm
.
/ to set the measuring cycle in minutes and confirm with
/ to set the number of readings and confirm with
.
.
OK
.
OK
.
OK
.
3
OK
.
OK
.