Start/Stop The Motors - Hubsan H107C Bedienungsanleitung

T R
X X
M1 M2
Expert
Mode 2
Elevator moves your quadcopter forward and backward.
T R
X X
M1 M2
Expert
Mode 2
Aileron moves your quadcopter left and right.

9.4 Start/Stop the Motors

When you need to stop the motors quickly you can use both sticks to stop the motors.
Start the motors
Pull the two sticks as the picture shows. Release
them after the motors start.
Note: You can also use the throttle stick to start/
stop the motors. The X4 will ascend or descend
slowly.
Stop the motors
Pull the two sticks again as in the picture.
Release them after the motors stop.
Always stop the motors before you power off the transmitter. If you power off the
transmitter first, the motors will keep on for 3 – 4 minutes and the X4 will land down
slowly.
T R
X X
M1 M2
Expert
Mode 1
T R
X X
M1 M2
Expert
Mode 1
www.hubsan.com
Forward
Backward
Left
Note: When you exit the headless mode,
controls will appear reversed if the X4 is
flying towards you!
37
Right
H107C+
THE HUBSAN X4