Care And Maintenance; Accessories; Customer Service; Disposal - Rothenberger Rorec Pro A3 Bedienungsanleitung

4

Care and Maintenance

If you have the compressor repaired in any circumstances, please do a leak test before
use and make sure there's no leak.
How to do the leak lest:
 Block the outlet port with a ball valve, keep the inlet in connection with the atmosphere.
 Turn the knob to the "FAST" and start the machine. When the outlet pressure rises to 30bar,
press the "STOP", and then turn the knob to the "PURGE".
 Leave it alone for 30 minutes. Check the reading of the low pressure gauge. If the pressure
is higher than 15bar, then it passes the test. If it is lower than 13bar, there a leak; if it is be-
tween 13bar and 15bar, leave it for another 30 minutes. If the pressure drops s 3bar, then it
passes the test.
5

Accessories

You can find suitable accessories in the main catalog or at www.rothenberger.com
6

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online:  + 49 (0) 61 95/ 800 8200 sf + 49 (0) 61 95/ 800 7491  service@rothenberger.com -
www.rothenberger.com
7

Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose electric tools with domestic waste. In accordance with the European
Directive 2012/19/EU the disposal of electrical and electronic equipment and its imple-
mentation as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
24 ENGLISH