Operating Elements & Connections - Omnitronic OD-5A Bedienungsanleitung

4
OPERATING ELEMENTS & CONNECTIONS
This user manual describes the rear panel of model OD-6A as a reference. Illustrations and features of the
other model are comparable.
OD-6A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ON
OFF
AC 230V/50Hz
FUSE 1A
POWER
LOW
GND
BAL
AUX
HI
RCA
LEVEL UNBAL
1 Power switch
Turns the device on and off.
2 POWER indicator
Lights up when the device is turned on.
3 Tone control LOW
Adjusts the low frequencies of the input
signal.
4 Tone control HI
Adjusts the high frequencies of the input
signal.
5 LEVEL control
Adjusts the overall volume.
6 Power input and fuse
Only replace the fuse when the device is
disconnected from mains. Only use fuses
of the same rating and power. The
correct fuse value is specified on the rear
panel.
7 Balanced spring terminals
3-pole spring terminals for connecting
audio units with line level. To facilitate
handling, the terminals can be removed
from their plug-in connections on the unit
and replaced after connection.
8 Unbalanced 3.5 mm jack
Connects audio units with line level via
3.5 mm plug.
Not available for model OD-5A.
9 Unbalanced input RCA
Connects audio units with line level via
RCA.
15