Herunterladen Diese Seite drucken

Omnitronic OD 2 Bedienungsanleitung

Wetterfester wandlautsprecher
Vorschau ausblenden Andere Handbücher für OD 2:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

USER MANUAL
EN
Thank you for purchasing this speaker for wall mounting. The speaker is suitable
for outdoor installation (e.g. patios) and is rated IP 44. The connection must be
made by skilled personnel only. Please read these operating instructions carefully
before using the product. They contain important information for the correct use
of your product. Please keep them for future reference.
SAFETY INSTRUCTIONS
Only use the product according to the instructions given herein. No guarantee
Ÿ
claims for the units and no liability for any resulting personal damage or
material damage will be accepted if the product is used for other purposes than
originally intended, if it is not correctly connected or operated, or if it is not
repaired in an expert way.
Unauthorized rebuilds or modifications of the product are not permitted for
Ÿ
reasons of safety and render the warranty invalid.
This product is not a toy. Keep it out of the reach of children. Do not leave
Ÿ
packaging material lying around carelessly.
This product is in accordance with protection grade IP44 and can be used in
Ÿ
outdoor areas. However, do not immerse the product in water, this will destroy
it.
Protect the product against excessive humidity and heat. The recommended
Ÿ
temperature is -5 to +45°C.
Speaker cables are sensitive to electrical interference. Hence, it is
Ÿ
recommended to lay them at a distance of several meters to sources of
interference (e.g. dimmers, light switches).
Make sure that the product is installed securely and cannot fall down. Serious
Ÿ
injury to persons can be caused if the speakers fall down. Comply with the
standards and rules that apply in your country.
Make sure that the area below the installation place is blocked when rigging,
Ÿ
derigging or servicing the device.
For overhead use secure the device with a safety bond. A corresponding eyelet
Ÿ
is mounted on the housing for this purpose. Fasten the safety bond in such a
way that, in the event of a fall, the maximum drop distance of the device will not
exceed 20 cm.
For commercial use the country-specific accident prevention regulations of the
Ÿ
government safety organization for electrical facilities must be complied with at
all times.
Make sure that impedance and power rating specified in the technical data
Ÿ
match the connected amplifier's data. Otherwise, the speakers or the amplifier
may be damaged. The total impedance for the connected speakers must not be
less than the minimum impedance for the amplifier.
This product is maintenance-free, except for occasional cleaning. You can use
Ÿ
a slightly dampened cloth for cleaning.
Never open the product. If this product is no longer working properly or is
Ÿ
visibly damaged, take it out of operation and consult your local dealer. Do not
attempt to repair the product yourself.
PROTECTING THE ENVIRONMENT
When to be definitively put out of operation, take the product to a local
recycling plant for a disposal which is not harmful to the environment.
Devices marked with this symbol must not be disposed of as household
waste. Contact your retailer or local authorities for more information.
© 2023 Omnitronic. All rights reserved • Omnitronic is a brand of Steinigke Showtechnic GmbH • Andreas-Bauer-Str. 5 • 97297 Waldbüttelbrunn, Germany
OD 2/22
WEATHER-PROOF WALL SPEAKER 8W/IP44
INSTALLATION
Mount the speaker to the wall using the supplied bracket .
Ÿ
Turn off the amplifier before making any connection.
Ÿ
Connect the speaker to the amplifier outputs with a suitable speaker cable
Ÿ
(black clamp = negative pole, red clamp = positive pole).
When connecting several speakers, make sure that all speakers have the same
Ÿ
polarity and that the amplifier is not overloaded.
TECHNICAL SPECIFICATIONS
Model (item no.)
11036900/...1 OD-2
Rated power:
15 W RMS
Program power
30 W
Components:
6.35 cm (2.5")
Connection:
spring terminal
Sensitivity:
88 dB
Maximum SPL:
103 dB
Frequency range:
150-22000 Hz
Dispersion angle:
60° x 60°
Dim. in mm (L x W x H):
111 x 87 x 90
Weight (piece):
0.5 kg
Subject to change.
www.omnitronic.de
11036906/...7 OD-22
20 W RMS
40 W
2 x 6.35 cm (2.5")
spring terminal
88 dB
104 dB
120-22000 Hz
60° x 60°
110 x 209 x 109
0.9 kg
Publ. 08/2023

Werbung

loading

Inhaltszusammenfassung für Omnitronic OD 2

  • Seite 1 Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information. © 2023 Omnitronic. All rights reserved • Omnitronic is a brand of Steinigke Showtechnic GmbH • Andreas-Bauer-Str. 5 • 97297 Waldbüttelbrunn, Germany Publ. 08/2023...
  • Seite 2 Für weitere Informationen wenden Sie sich bitte an Ihren Händler oder die zuständige örtliche Behörde. © 2023 Omnitronic. All rights reserved • Omnitronic is a brand of Steinigke Showtechnic GmbH • Andreas-Bauer-Str. 5 • 97297 Waldbüttelbrunn, Germany Publ. 08/2023...

Diese Anleitung auch für:

Od 22