Operating Determinations - Omnitronic OD-5A Bedienungsanleitung

3

OPERATING DETERMINATIONS

The wall speaker systems of the OD series are high-performance active speaker systems in light-weight and
rugged plastic cabinets. The speakers are designed as 2-way systems with connectors for line source, 2-
band EQ and volume control. The panning and tilting mounting bracket allows ceiling or wall installation in
most varying angles.
Power Supply
This product is allowed to be operated with an
alternating current of 230 V, 50 Hz and was designed
for indoor use only. If the device will be directly
connected with the local power supply network, a
disconnection switch with a minimum opening of 3 mm
at every pole has to be included in the permanent
electrical installation. The device must only be
connected with an electric installation carried out in
compliance with the IEC standards. The electric
installation must be equipped with a Residual Current
Device (RCD) with a maximum fault current of 30 mA.
Public and Industrial Use
Operating an amplification system in public or industrial
areas, a series of safety instructions have to be
followed that this manual can only give in part. The
operator must therefore inform himself on the current
safety instructions and consider them.
Maximum Power
The maximum power of the speaker system must never
be exceeded. When operating the speaker system,
please make sure that the loudspeakers always sound
well. When distortions can be heard, either the amplifier
or the loudspeaker is overloaded. Overloads can
quickly lead to amplifier or speaker damage. In order to
avoid damage, please reduce the volume immediately
when distortions can be heard. When speaker systems
are destroyed by overload, the guarantee becomes
void.
Installation
Before installing the system, make sure that the
installation area can hold a minimum point load of 5
times the system's load (e.g. weight 20 kg - point load
100 kg. Make sure that the area below the installation
place is blocked when installing, uninstalling or
servicing the
fixture.
Admissible Temperatures
The ambient temperature must always be between
-5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The relative humidity
must not exceed 50 % with an ambient temperature of
45° C. This device must only be operated in an altitude
between -20 and 2000 m over NN.
Operation
Operate the speaker system only after having
familiarized with its functions. Do not permit operation
by persons not qualified for operating the speaker
system. Most damages are the result of unprofessional
operation.
Transport
This product is not designed for rigorous road use.
Move it carefully and without force. Please use the
original packaging if the device is to be transported.
Cleaning
Never use solvents or aggressive detergents in order to
clean the device! Rather use a soft and damp cloth.
Modifications and Guarantee
Please consider that unauthorized modifications on the
speaker system are forbidden due to safety reasons! If
this speaker system will be operated in any way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation may
lead to dangers like crashes, hearing loss etc.
14