Operating Determinations; Installation; Attachment - Omnitronic WF Bedienungsanleitung

By operating speakers with an amplifier, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.
There are no serviceable parts inside the speaker. Maintenance and service operations are only to be
carried out by authorized dealers.

3. OPERATING DETERMINATIONS

This flush-mount speaker is a passive system specially designed for application in audio systems operated
with 8 speakers. This product is only allowed to be connected with an appropriate amplifier and must only
be used for permanent installations.The speaker is suitable for outdoor installation (IP 44).
The maximum power of the speaker must never be exceeded. When operating the speaker, please make
sure that the loudspeakers always sound well. When distorsions can be heard, either the amplifier or the
loudspeaker is overloaded. Overloads can quickly lead to amplifier or speaker damage. In order to avoid
damage, please reduce the volume immediately when distortions can be heard. When speakers are
destroyed by overload, the guarantee becomes void.
Speakers must only be operated by instructed persons.
Danger of hearing loss due to excessive sound pressure levels! The different local conditions
have to be considered in terms of safety rules.
The ambient temperature must always be between -25° C and +45° C.
Keep away from direct insulation (particularly in cars) and heaters.
The relative humidity must not exceed 100 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Operate the speaker only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the speaker. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the speaker! Rather use a soft and damp
cloth.
Please consider that unauthorized modifications on the speaker are forbidden due to safety reasons!
If this speaker will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to damage.

4. INSTALLATION

4.1 Attachment

Before attaching the speaker, make sure that the installation area can hold a minimum point load of 5 times
the speaker's weight.
The device must only be installed at a vibration-free, oscilation-free and fire-resistant location.
Please refer to the instructions under Operating Determinations.
The given minimum mounting depth must be kept to leave free space behind the speaker.
HEALTH HAZARD!
WARNING!
8/10 00042149.DOC, Version 1.0