Blade INDUCTRIX FPV+ RTF Bedienungsanleitung Seite 34

Problem
LED on the
receiver flashes
rapidly and the
quadcopter will
not respond to the
transmitter (after
binding)
Crashes immedi-
ately upon lift-off or
doesn't lift off
EN
Possible Cause
Less than a 5-second
wait between first
powering on the trans-
mitter and connecting
the flight battery to the
quadcopter
The quadcopter is
bound to a different
model memory
(ModelMatch
™
transmitters only)
Flight battery or trans-
mitter battery charge is
too low
Aircraft or transmitter is
too close to large metal
object, wireless source
or another transmitter
Propellers in wrong
locations
34
Solution
Leave the transmitter powered
on. Disconnect and recon-
nect the flight battery to the
quadcopter
Select the correct model
memory on the transmitter.
Disconnect and reconnect the
flight battery to the quadcopter
Replace or recharge batteries
Move aircraft and transmitter
to another location and attempt
connecting again
Make necessary adjustments