Blade INDUCTRIX FPV+ RTF Bedienungsanleitung Seite 31

When powered on, the video monitor
is in FPV mode. The buttons have the
following functions while the monitor is
in the various video modes:
FPV mode
• CH Button: Press once to change the channel. Press and hold for
approximately 3 seconds to auto scan available channels.
• FR Button: Press once to change the frequency band. Press and
hold for approximately 3 seconds to auto scan.
• M Button: Press once to access the on-screen menu. Press again
to exit the on-screen menu.
• – and + Buttons: Press to decrease or increase speaker volume
and to adjust menu selections.
• Back Panel Button: Press once to start recording to the DVR.
Press again to stop recording. Press and hold to change from FPV
mode to DVR mode.
DVR play-back mode
• CH Button: No function.
• FR Button: Press once to change between DVR record mode and
DVR playback mode.
31
EN