Troubleshooting Guide; Possible Cause - Blade Inductrix Fpv+ Rtf Bedienungsanleitung

Troubleshooting Guide

Problem
Will not respond to
throttle
Does not function
and smells burnt
after connecting
the flight battery
LED on receiver
flashes rapidly
and quadcopter
will not respond to
transmitter (during
binding)

Possible Cause

Throttle too high and/or
throttle trim is too high
Flight battery con-
nected with the wrong
polarity
Transmitter too near
aircraft during binding
process
Bind switch or button
was not held while
transmitter was pow-
ered on
Aircraft or transmitter is
too close to large metal
object, wireless source
or another transmitter
Reset controls with the throttle
stick and throttle trim at the
lowest setting
Replace the 3-in-1 board. Con-
nect the flight battery noting
proper polarity
Power off the transmitter. Move the
transmitter a larger distance from
the aircraft. Disconnect and recon-
nect the flight battery to the aircraft.
Follow the binding instructions
Power off transmitter and re-
peat bind process
Move aircraft and transmitter
to another location and attempt
binding again
33
Solution
EN