Technical Data; Installation - IKEA FROSTIG BCF228/64 Bedienungsanleitung

ENGLISH
Problem
Water flows on the
ground.
The temperature in the
appliance is too low/
high.
If your appliance is still not working proper-
ly after making the above checks, contact
the After Sales Centre. You can find the list
at the end of this manual.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.

Technical data

Dimensions
Height
Width
Depth
Net Volume
Fridge
Freezer
Defrost System
Fridge
Freezer
Star Rating
Rising Time
Freezing Capacity
Energy Consumption
Noise Level
Energy Class

Installation

Caution! Read the "Safety
Information" carefully for your safety
Possible cause
The melting water outlet does
not flow in the evaporative
tray above the compressor.
The temperature regulator is
not set correctly.
1827 mm
540 mm
552 mm
228 Litre
64 Litre
auto
auto
21 hours
8 kg/24h
0,893 kWh/24h
39 dB (A)
A+
Solution
Attach the melting water outlet
to the evaporative tray.
Set a higher/lower tempera-
ture.
Only service is allowed to replace the light-
ing device. Contact your Service Center .
Closing the door
1. Clean the door gaskets.
2. If necessary, replace the defective door
gaskets. Contact the After Sales Service.
The technical infor-
mation are situated
in the rating plate on
the internal left side
of the refrigerator
compartment and in
the energy label.
and correct operation of the appliance
before installing the appliance.
16