Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Cleaning and care
˜ Cleaning the main unit
m
DANGER! Risk of electric shock! Before
cleaning and maintenance: Disconnect the power
plug 7 from the mains socket .
m
WARNING! Do not immerse the product's
electrical components in water or other liquids .
Never hold the product under running water .
Wipe down the product with a slightly damp
cloth .
Do not let any water or other liquids enter the
product interior .
Do not use any abrasive, aggressive cleaners or
hard brushes to clean the product .
After cleaning: Let all parts dry completely .
˜ Cleaning the accessories
Clean the accessories in warm, soapy water .
After cleaning: Let all accessories dry completely .
Cleaning the cotton cover 10
The cotton cover 10 can be hand-washed in
water with temperature up to 60 °C .
After cleaning: Let the cotton cover 10 dry
completely . You may also use a tumble dryer at a
low level (55 °C) .
26 GB/IE
˜ Removing limescale
If the steam power reduces drastically, it may be
needed to remove the limescale from the water tank
2 /accessories:
Water tank 2 :
Disconnect the power plug 7 from the mains
socket .
Fill the water tank 2 with a mixture of tap water
and vinegar (ratio of 2:1) .
Wait 24 hours .
Drain the mixture into a sink .
Flush the water tank 2 with fresh water (see
"Filling the water tank") .
Accessories:
Disconnect the power plug 7 from the mains
socket .
Fill the water tank 2 with a mixture of tap water
and vinegar (ratio of 2:1) .
Install the accessory you wish to remove the
limescale from .
Secure the position of the product to ensure that
the steam is aimed away from the surrounding
objects and surfaces .
Turn on the product . Operate the product until all
the mixture is used up .
˜ Storage
Store the product in the original packaging when
it is not in use .
Store the product at a dry location out of the
reach of children .
Store the product with an emptied water tank 2
only .
Werbung
