12/24-Hour Clock System; Setting The Time - Voltcraft Rm-300 Bedienungsanleitung

11.5 12/24-hour clock system

In this menu item, you can change the time display between the 12 and 24 hour
clock system.
Press the „Set" button (b) once, to access the settings. If you are already in
settings, press the „Menu" button (d) repeatedly until you reach the menu item
that you require.
Press the „Menu" button (d) to switch to the „12H" or „24H" display.
Use the „Set" button (b) or „Unit" button (c) to change the setting.
Then press the „Menu" button (d), to confirm the setting and move to the next
setting mode, or press and hold the „Set" button (b), to exit the setting mode.

11.6 Setting the time

You can set the time in this menu item.
Press the „Set" button (b) once, to access the settings. If you are already in
settings, press the „Menu" button (d) repeatedly until you reach the menu item
that you require.
Press the „Menu" button (d) repeatedly until the hours display (3) starts to flash.
Use the „Set" button (b) or „Unit" button (c) to change the setting.
Press the „Menu" button (d), to confirm the setting for hours and move to the
minutes setting. The minutes display will start to flash.
Then press the „Menu" button (d), to confirm the setting and move to the next
setting mode, or press and hold the „Set" button (b), to exit the setting mode.
30