Menu Settings - Voltcraft Rm-300 Bedienungsanleitung

11.3 Menu settings

You can adjust the following settings in the device menu:
Count sound and button sound: ON or OFF
24-hour clock switch: 24-hour or 12-hour clock can be selected
Time format: Hour: Minutes
Alarm threshold measurement: 0.00-9999μSv/h, the default setting is 0.5μSv/h
Cumulative alarm threshold: 0.000-99.99μSv/h, the default value is 3.0μSv/h
11.4 Setting the Count sound and button sound
If the count sound is switched on, the dosimeter emits a short sound signal when it
detects radiation (decay of a radioactive particle); the stronger the intensity of the
radiation, the more frequent the repetition of the signal.
Press the „Set" button (b) once, to access the settings. If you are already in
settings, press the „Menu" button (d) repeatedly until you reach the menu item
that you require.
Press the „Set" button (b) or the „Unit" button (c), to select „ON" or „OFF".
Then press the „Menu" button (d), to confirm the setting and move to the next
setting mode, or press and hold the „Set" button (b), to exit the setting mode.
29