To Specify A Disc To Play; Repeat Or Random Play - Sharp CD-BA3100H Bedienungsanleitung

To Specify a Disc to Play

You can play a disc by specifying the disc number.
Press one of the 1 - 6 buttons to play the desired disc.
Selected disc number
Only the chosen disc will be played and stopped automatically.
Note:
Among discs 1 - 6, those with whitely illuminated CD indicators in the frame can be
played. However, if the button of the disc tray with no disc is pressed, playback will not
start and the indicator in the frame will go out.
To stop playback:
Press the (CD ) button.

Repeat or Random Play

„ Repeat Play
All tracks on up to 6 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 6 discs:
Press the / ( ) button twice.
By pressing the / ( ) button after one of the
repeat play will be performed on that disc.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed Play" section and then press the
button twice.
To cancel repeat play:
Press the / ( ) button again.
" " will go out.
„ Random Play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
By pressing the RANDOM button after one of the
dom play will be performed on that disc.
To cancel random play:
Press the button.
Notes:
z If you press the
/ button during random play, you can move to the track
selected next by the random operation. On the other hand, the
does not allow you to move to the previous track. The beginning of the track being
played will be located.
z In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
wise, the disc(s) will play continuously.
1 - 6 buttons is pressed,
/ ( )
1 - 6 buttons is pressed, ran-
/ button
(CD ) button. Other-
ENGLISH E-15