General Control; Demonstration Mode; To Turn The Power On - Sharp CD-BA3100H Bedienungsanleitung

General Control

„ Demonstration mode

The first time the unit is plugged, the unit will enter the demonstration mode. You will
see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the X-
BASS/DEMO button. The unit will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the extra
bass mode.

„ To turn the power on

Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
„ Display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
Dimmed Brightened
E-10 ENGLISH